Komatsu — PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS

OPERATION OPERATION STOPPING TRAVEL ON SLOPES When stopping travel when traveling up or down a slope, return the travel levers slowly to the neutral position (stop- ping position), then set the safety lock lever to the LOCK position. When leaving the operator’s seat, use blocks to prevent the machine from moving. IF ENGINE STOPS If the engine stops on a slope, return the travel levers immediately to the neutral position, set the safety lock lever to the LOCK position, and start the engine again. PRECAUTIONS ON SLOPES If the engine stops when the machine is on a slope, never use the right work equipment control lever to carry out swing operations.

The upper structure will swing under its own weight. Be extremely careful when opening or closing the door on slopes. The weight of the door may cause a sud- den change in the operating effort. Always lock the door in position before starting. 3-66