OPERATION TRANSPORTATION When loading or unloading, always use ramps or a platform and carry out the operation as follows. LOADING 1. Perform loading and unloading on firm, level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Then fix the ramps in line with the centers of the trailer and the machine. Be sure that the two sides are at the same level as one another. Make the slope of the ramps a maximum of 15є. Set the distance between the ramps to match the center of the tracks. 3. Lower the body. 4. Set the travel speed selector switch to the LOW position. 5.
Lower the engine speed using the fuel control lever. 6. Set the swing lock switch to the ON position to apply the swing lock. 7. Drive the machine toward the ramps, then travel slowly to load or unload the machine. 8. Place the specified position of the trailer correctly. 3-75