SERVICE PROCEDURE MAINTENANCE LUBRICATING WARNING Check that there is no one on the body or in the surrounding area, then raise the body. After operating the body, use the pedal lock to lock the body control pedal. Set the safety bar securely in position to prevent the dump body from coming down. NOTICE Carry out the greasing every 10 hours for the first 100 hours on a new machine when the parts are being broken in. Prepare a grease gun. 1. Raise the dump body, set safety bar (1) securely in posi- tion, stop the engine, then set the safety lock lever to the LOCK position. 2. Using a grease gun, pump in grease through the grease fittings shown by arrows. 3.
After greasing, wipe off any old grease that was pushed out. (1) Dump body mount (2 points) (2) Dump body cylinder rod end (2 points) (3) Dump body cylinder mount (2 points) (4) Rear gate lock lever and link (box type body specification) (10 points) 4-32