. OPERATION DETAILED CONTROLS AND GAUGES Controls of Radio 3 - 51 Preset Station Buttons 1. Press power switch (1) (7). 2. Turn the tuning button desired frequency. 3. Select a preset button setting, and keep that b The sound will disappea sound will appear and th (7) to show that the stat After completion of pre release it within approx to the frequency of the button. One AM station each preset button. and display the frequency on display (5) (manual, auto) to adjust to the to use for recording the frequency 1. 2. 3. 1. 2. desired frequency. 3. Select a preset button requency setting, and keep that b utton pressed for at least 1.5 seconds.
The sound will disappea r, but when the setting is recorded , the sound will appear and th e preset number will appear o n display (7) to show that the stat ion has been preset. setting, press preset button (6), and After completion of pre and release it within approx . 1.5 seconds. The setting wi ll change to the frequency of the broadcasting station recorde d for that button. One AM station and one FM station can be recorde d for each preset button. Manual Tuning set to the desired frequency. ssed, the frequency will move up or down in steps of 9 kHz (AM) or 0.1 MHz (FM).
equency station requency station Press tuning button (5) and set to the desired frequency Each time the button is pre ssed, the frequency will move up o r down in steps of 9 kH z (AM) or 0.1 MHz (F ∨ button: Move to a lower fr ∧ button: Move to a higher f If the frequency reaches the top or bottom limit, it will a utomatically change as follo ws: top limit -> bottom limit, or bottom limit -> top limit Automatic Tuning Keep tuning button (5) pr essed for at least 0.5 seconds. When a broadcasting station is picked up, it will ch for the next station, press tuning button (5) again for at least 0.5 seconds. equency station requency station Whe automatically stop.
To sear ch for the next station, press tunin g button (5) again for at ∨ button: Move to a lower fr ∧ button: Move to a higher f If tuning button (5) is pre ssed during auto tuning, the a uto t uning will be canceled a nd the frequency at th e point where it is canceled will be picked up.