. OPERATION MACHINE OPERATIONS AND CONTROLS Suspension Seat (If equipped) (B) Adjusting reclining upright that is 3 - 64 (A) F ore-and-aft adjustment Move lever (1) to the upper, set the operator's seat at the positi on, then release the le Fore-and-aft adjustment: 50 REMA RK The s eat can be reclined mo re when the seat is pushed to t The a mount of reclining dec reases as the seat is pushed b when moving the seat back, return the seatback to the on. positi Pull up lever (2) and set the seat back to a position hen release the lever. comfortable for operation, t Sit wi th your back against th e seat backrest when adjusting back is not against the back rest, the backrest may sudden forwa rd.
(C) A djusting armrest angle spring up by hand approx. 90°. Armre st (3) can be made to spring up by hand approx. 90 In ad dition, by turning the di al (4) at bottom of armrest by h and it is possible to make fine vert ical adjustment of the armre st angle. 25°. Armre st adjustment angle: REMA RK If the seat back is tipped to the front without raising the ar mrest (3), the armrest will rise auto (D) O verall fore-and-aft adju stment of seat Move lever (5) to right. After the seat is set to the desired p osition, release the lever (5). In thi s case, the operator's seat, left and right control le vers, and safety lock lever all slide togethe Fore-and-aft adjustment:
10 (E) A djusting suspension dial to your own weight by turning knob (6) under the operator's seat. to 50 to 120 kg (110 to 265 lb). Adjus t the weight adjusting dial to your own weight by turn ing knob (6) under the operator's The w eight can be adjusted to 50 to 120 kg (110 to 265 lb If you want to make the seat softer, turn the weight adjustm ent to a lower weight; if you want to make the seat harder, adjus t to a higher weight.W hen operating on uneven surfa ces, adjust t he seat to a harder se tting.