Komatsu — REPLACE RUBBER SHOES

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE RUBBER SHOES (Machine equipped with rubber shoes) WARNING ground, then stop the machine. Prepare a grease gun Prepare a steel pipe Rubber Shoes Removal WARNING 4 - 34 Carry out this ope ration with two workers. Th e operato r mu st move the dance with the signals from the other worker. The rubber shoe s are replaced with the machine raise d, s ous if the machine is lower ed by mistake during the ation. During the replaceme nt operation, neve r move rack except the rubber shoe track to be re placed. go under or put any part of y our body unde r the rubber e during the replacement o peration.

To check that the track tension is correct, ru n the engine at low idling, e forward a distance equal ack on NOTICE It is possible to chan ge from the rubber shoe to the road l iner a nd stee l shoe. However, i t is necessary to r emove the id ler guard and to carry out adju stment, so always contact your Komatsu distributor to have the rep lacement carried out. It is extremely da ngerous to release the grea se by any method except the procedure given below. If the rubber shoe tension is not relieved by t his procedure, please contac t your Kom atsu distributor f Check that all the grease has been released b efore rotating the sprocket t o remove th e rubber shoe. 1.

Raise the cha ssis with the boom and a is, operate the levers slo