Komatsu — WASH WASHABLE FLOOR

. MAINTENANCE MAINTENANCE PROCEDURE WARNING NOTICE in a stable condition. 4. Set the safety lock lever to the LOCK position and stop the engine. 4 - 46 WASH WASHA With the washab le floor, it is possibl e to flus h out th e dirt on the cab floor directly with wate When setting th e machine at an angle, use strong block s to stabilize the machine and be extremely careful when carrying out the operation. If the control lev ers are touched by mistake , the work equ ipment or ma chine may suddenly move, and this may lead to a serious accident. Alway s set the safety lock l ever securely to th e LOCK posi tion before standing up from t he operator's seat.

When setting th e machine at an angle, use strong block s to stabilize the machine and be extremely careful when carrying out the operation. If the control lev ers are touched by mistake , the work equ ipment or ma chine may suddenly move, and this may lead to a serious accident. Alway s set the safety lock le ver securely to th e LOCK posit ion before standing up from t he operator's seat. While cleaning the cab floor, take care so that the c onnector , air condition er main body and filters may n ot be splashed with water Method of Washi 1. Set the mach ine at an angle. ee "Method of Setting Machine at A ngle (PAGE 4-47)" 2.

Swing the up per structure slowly so that water d rain holes ( or are at a low position. 3. Lower the wo rk equipment to the ground and se t the machin 5. Remove the floor mat. 6. Flush out the dirt on the floor directly wit h water t hrough wat drain hole (1) . 7. After comple ting the washing operation, install th e floor mat.