Komatsu — CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil temperature to go down before performing this operation. 5. Open the engine hood, then use a filter wrench to turn filter cartridge (2) to the left and remove it. holder from becoming dirty. install. 4 - 63 Refill capacity: 7.0 liters Filter wrench 1. Remove cover (1) und er the machine, then place a c ontainer directly under drain plu g (P) to catch the drained oil. 2.

Remove drain plug (P ) slowly to avoid getting oil on yourself, il, and if there are excessive metal aterial, please contact your Komatsu and drain the oil. 3. Check the drained o particles or foreign m distributor. 4. Install drain plug (P). REMARK Put a cloth in contact wit h the notched part of the oil container ontainer 6. Clean the filter holder, threaded portion with c coat the new filter cartridge packing lean oil (or coat thinly with grease), and then REMARK Check that there is no old p acking affixed to the filter holde r. If t here s any old packing affixed to the filter, it will cause leakag e of oil . 7.

When installing, bring the packing surface into contact with the seal surface of the filt ct with the seal surface of the filt further 1/2 turns. 8. After replacing the filte r cartridge, add oil through oil fi ller (F) until the oil level is betwee the dipstick (G). 9. Run the engine idle for a while, then stop the engine and confirm that the oil level is be according to "Check O il Level in Engine Oil Pan, Add Oil (PAGE 10. Install cover (1).