. SAFETY SAFETY INFORMATION ATTACHMENT INSTALLATION 2 - 17 When installing optional parts or a ttachments, there may be problems with safety or legal restrictions. Therefore contact your Komatsu distributor Any injuries, accidents, or produc t failures resulting from the use of unauthorized attachme nts or parts will not be the responsibility of Komatsu. When installing and using optiona l attachments, read the instruction manual for the attach ment, and the general information related to attachment ATTACHMENT COMBINATIONS Depending on the type or combinatio n of work equipment, there is a hazard that the work equ ipment may hit the cab or other parts of the machine.
Before using unfamiliar work equipment, check if there is any hazard of interference, and operate with caution. CAB WINDOW GLASSES If a pane of the cab window on the work equipment side is broken, the work equipment may directly hit the achine immediately and replace the broken pane with new one. operator. In that case, stop the m achine immediately and replace the broken pane with n The ceiling window is made of org anic glass (polycarbonate), and as such it is apt to break easily when receiving damage on the surface, thereby deteriorating its protective characteristic. If there is a cra ck or damage caused by a fallen rock, or when any sign of them is noticed, replace it with a new window.
UNAUTHORIZED MODIFICATIONS horization from Komatsu can create hazards. Before making a modification, Any modification made without aut consult your Komatsu distributor. Komatsu will not be responsible f or any injuries, accidents, product failures or other prope rty damages resulting from modifications made without authorization from Komatsu. SAFETY AT JOBSITE ly check the area for any unusual conditions that could be dangerous. Before starting operations, thorough ly check the area for any unusual conditions that could When carrying out operations nea r combustible materials such as thatched roofs, dry lea ves or dry grass, there is a hazard of fire, so be careful w hen operating.
Check the terrain and condition of the ground at the worksite, and determine the safest m ethod of operation. Do not carry out operations at places where there is a hazard of landslides or falling rocks. oltage electrical lines may be t each utility and identify their or damage any of these lines. zed people from approaching position flagmen and erect ssing traffic and pedestrians. allow water or on soft ground, f the bedrock, and the depth fore starting operations. If water lines, gas lines, or high-v buried under the worksite, contac locations. Be careful not to sever Take action to prevent unauthori the jobsite.
When working on public roads, barriers to ensure the safety of pa When traveling or operating in sh check the shape and condition o and speed of flow of the water be