. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 72 CHECK BEFORE STARTIN Perform the contents of this se ction before starting the work of each Do not open the sub-Tank cap u nless necessary. Wait for the engine to c ool down before checking the coolant in the Reservoir tank. Immediately after the engine is stopped, the coolant is at a high temperatur e and the sub-tank is u nder high internal pressure If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wai t for the temperature to go down, then turn the cap slowly to release the pressure before removing it. 1.
Open the engine hood and check that the coolant in reservoir tank (1) is between the FU LL and LOW marks. 2. If the level is LOW, remove up to the FULL mark. cap (2) and add the engine coolant 3. If there is no coolant in th (AF-NAC) of the same d radiator. Add the Superco top of the sub-tank, then tank. 4. Check that there is no oil problem. e reservoir tank, add Supercoolant ensity as the Supercoolant in the olant through water filler (3) at the add Supercoolant to the reservoir in the engine coolant or any other n the cap securely. than normal, then check for water 5. After adding coolant, tighte 6. If more coolant is added leakage. CHECK DUST INDICATOR 1.
Check that the red line i indicator (1) does not ind (0.076 kg/cm2, 1.1 PSI). 2. If the red line indicates 7.5 k 2, 1.1 PSI), clean or r immediately. For details of the metho "CHECK, CLEAN OR R 4-21)". 3. After checking, cleaning, indicator (1) to return the r n the transparent portion of dust icate 7.5 kPa (30 INCHES H2O) Pa (30 INCHES H2O) (0.076 kg/cm 2. If the red line indicates 7.5 k eplace the air cleaner element d of cleaning the element, see EPLACE AIR CLEANER (PAGE or replacing, press the top of dust ed line to its original position.