. OPERATION OPERATION ADJUST SEAT BELT WARNING ADJUST STEERING WHEEL TILT WARNING 3 - 81 Before fastening the seat belt, check that there is no problem in the securing brackets or belt. If ther e is any wear or da mage, replace. Even if there appears to be no problem in the seat belt, replace the seat belt once every 3 years. Th e date of manufac ture is woven on the reverse side of Adjust and fasten the seatbelt Always use the seatbelt when D o not use the seat belt with e Fastening and removing belt ht without being too tight. the brake pedal fully, and adjust the pressed against the backrest. Fasten the belt so that it is tig 1. 2. 3. 1.
Sit on the seat, depress seat so that your back is pressed against the backrest. 2. Sit in the seat, pull the rig ht side of the belt, then insert tongue (1) into buckle (2) until a click is heard. press the red button in buckle (2) to ws your body and is not twisted. 3. When removing the belt, free the belt. Fit the belt so that it follo ws your body and is not twiste e (2) to Always stop the machine before adjusting the tilt of the steering w hee The tilt of the steering wheel can be adjusted to the front an d rear, and up and down. Pull lever up and set the steering whee l to the desired position, then push le ver down to lock the steering wheel rear:
80 mm/80 mm (3.2 in/3.2 in) center of steering wheel) 3 mm (1.3 in) : 17 mm (0.7 in) wheel securely in position. Amount of adjustment: Front/ rear: 80 mm/80 mm (3.2 in/3. 2 in (from Up: 3 Down