. OPERATION OPERATION 3 - 110 WHEN USING TILT CYLINDE 1. Remove pin (1) in t he mount at the rear of the cab, and insert it in h ole ( 3). 2. Remove t he ca b mounting bo lts (8 pieces 3. Apply hydraulic pressure (20. 6 to 34.3 MP a (210 to 350 kg/cm 2, 298 0 to 4970 PSI) to hose (4 ) behind the f ront right wheel and raise the cab. 4. After tiltin g up, f ixed the cab i n position wit h lock bar (5) Make and l sur ock i e that lock t securely bar with (5) is lock After hole (