. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 74 EVERY 2000 HOURS S Maintenance for every 50, 2 50, 500 and 1000 hours service should be carried out at the s The parts and oil are at high t emperature immediately af ter the engine is stopped, and may cause s erious burns . Wait f or the temperature to go down befo re starting the operation. If there is still pressure remai ning inside the case, the o il or plug may fly out. Loosen the plug slowly to rel Refill capacity: Front left, right 6.0 liters (1.59 US gal) each , right 5.0 liters (1.32 US gal) eac ight 5.0 liters (1.32 US gal) each 1. Stop the machine so tha and drain plug (P) is at t 2. agai 3.
Add oil through the hole for plug (G) to the speci fied level 4. After adding oil, check th at the oil is at the specif ied level. See "CHECK OIL LEVEL I (PAGE 4-57)". N FINAL DRIVE CASE, ADD OIL (PAGE 5. Repeat the procedure in Steps 1 - 4 and change t he oil to a ll the final drive cases (front, c enter, rear).