. MAINTENANCE SERVICE PROCEDURE REPLACE HYDRAULIC FILTER ELEMENT WARNING cause burns. Wait for the 4 - 77 The temperatur temperature to go down b efore starting the work When r emoving th e oil fille r cap , tur n it slowly to release the i nterna l pressure, then remove it. 1. Remove bolt (1 ), then remove cover (2). 2. Turn the cap of oil f iller (F) slowly pressure, then remov e the cap 3. Remove bolts ( 3), the n remove cove r (4). Take out removed the el parts. 5. Instal l the new elemen t, then in stall c over (4) with bolts (3). 6. Instal l cover (2 ) with b olts ( elease the internal