. MAINTENANCE SERVICE PROCEDURE CLEAN TRANSMISSION CASE STRAINER WARNING CLEAN STRAINER IN DIFFERENTIAL LOCK HYDRAULIC CIRCUIT WARNING 4 - 79 The parts and oil a re at high temperature immediately a fter the e ngine is s topped, and may cause ser ious burns. Wait for the temperature to go down before starting t he operation. If there is still pres sure remaining inside the case, the o il or plug may fly out. Loosen the plug sl owly to release the pre Drain the oil from th e transmission cas e before starting the operatio n. For details, see Sect ion "CHANGE OIL IN TRANSMISSION C ASE (PAGE 4-66)" 1. Remove bolt ( strainer. 2.
Remove any dir t stuck to the straine r, then w ash in clean diese fuel or flushing oil. If the strainer is damaged, re place it. 3. Install the strain ers in their original position (2) and The parts and oil a re at high temperature immediately a fter the e ngine is s topped, and may cause ser ious burns. Wait for the temperature to go down before starting t he operation. If there is still pres sure remaining inside the case, the o il or plug may fly out. Loosen the plug sl owly to release the pre ssure. Clean the strainers (4 places) of the dif ferential lock hydraul ic circuit as 1. Remove plug ( 2. Take the strain er out from strainer case (2) , the n wash i t in clean 3.
Assemble the s trainer to strainer ca se (2), then install pl ug (1). Suction strainer for front differential l ock This is at the top of the front differen tial case