Komatsu — OPERATION OF SWITCHES

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM Method for forced display operation 1. Press TOTAL/SFT switch (1). The total payload is displayed (100 tons units, rounded to the nearest 10 tons) (lights up). 2. Press TOTAL/SFT switch (1) again. The overall number of cycles is displayed. (Unit: times) (lights up) 6 - 20 FORCED DISPLAY OF TOTAL PAYLOAD AND OVERALL NUMBER OF CYCLES The payload meter displays th e total payload when the load is dumped, but it is also possible to use t he fo llowing operation to display the total p ayload and overall number of cycles. For the total payload and o verall number of cycles, each time the load is dumped, its weight is added. time. added.

Furthermore, it is possible to c However, when this operation abnormality or warning is disp lear this figure and return the total to 0 at any time. is carried out, if any abnormality or warning h as occurred, th e error c ode for that layed in turn. 3. Press TOTAL/SFT switch (1 ":" is displayed (lights up) returns to the display for nor It is possible to clear all the data for total payload and overall number of cycles whenever des After the values are cleared, the total payload and overall number of cycles ar e calculated ag ain from Method of clearing total paylo ad and overall number of cycles ) to display the total payload and essed for at least 2 seconds.

umber of cycles display will flash. pressed again for at least 2 onds, if the display returns to the the zero clear operation is 1. Press TOTAL/SFT switch (1 overall number of cycles. 2. Keep CAL/CLR switch (2) pr The total payload or overall n 3. Keep CAL/CLR switch (2) seconds. After ":" is displayed for 2 sec normal operation display, completed. REMARK e same time for both the total payload and total number of cycles. ne of the above types of data. ayload/total number of cycles is as follows. Zero clear is carried out at th e same time for both the total payload and tota l numb er of cy It is impossible to clear only o The maximum limit for total p Total payload:

999900.0 tons Total number of cycles: 9999 Before exceeding the maximu m limit, carry out the zero clear procedure for t otal payload/tot al number of cycles.