Komatsu — Komatsu PC308USLC-3E0 Hydraulic Excavator Operation & Maintenance Manual

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING linkage, and hoses. If any problem is 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. 6. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 7. Check for problems in handrails, steps, loose bolts. If any problem is found, repair it. Tighten any loose bolts.

3 - 69 Walk-around Checks Before starting the engine, wa lk around the machine and look at th e undersid e of chassis for anything unusua l like loose bolts and nuts, leakage hydraulic system. of fuel, oil and coolant. Also check the condition of the work equipment and the ay, and collection of dust at places that reach high temperature. and Also check for loose wiring, pl ay, and collection of dust at places t hat reach high temperatur Remove any flammable materials from around the battery, engine, muffler, turbocharg er, or other high te mperature engine p arts. Leakage of fuel or oil will cause th e machine to catch fire.

Check carefully, b e sure to re pair any problem, o r contact your Komatsu distributor. I f the machine is at an angle, r eposition it level before checking. Perform the following inspecti ons and cleaning every day before s tarting eng ine for the day's 1. Check for damage, wear, play in work equipment, cylinders, li nkage, hos Check for cracks, excess found, repair it. 2. Remove dirt and debris fro m around the engine, battery, and r adiator. Check for dirt accumulated etc.) around the battery, flammable materials are fo For the removal of dust a FINS, OIL COOLER FI CONDENSER FINS (PAG around the engine and radiator.

Also check for flammable mate rial (dry leaves, t wigs, engine muffler, turbocharger, or other high temperature engine parts. If any dirt or und, remove them. nd dirt accumulated on the radiator fins, see "CLEAN AND INSPECT RADIATOR NS, AFTERCOOLER FINS,FUEL COOLER FINS, AND AIR CONDITIONER E 4-52)". 3. Check for coolant and oil l eakage around the engine Check for oil leakage from it. the engine and coolant leaks from th e cooling s ystem. If any pr oblem is found, r epair 5. Check for oil leakage from hydraulic equipment, hydraulic tank , hoses, a Check for oil leakage. If a ny problem is found, repair the area where oil i