. OPERATION MACHINE OPERATIONS AND CONTROLS Adjustment Seat Adjustment WARNING set the lock lever to the LOCK position to prevent any accidental (B) Adjusting reclining 3 - 78 When adjusting the posi tion of the operator's seat, alwa contact with the control l Always adjust the o perator's seat before starting each o peratio n or when the operators ch ange shift. Adjust the operator' s seat so control levers and switches can be operated freely and easily with the operator's ckrest. switche s can b back against the ba (A) Fore-and-aft adjus tment Pull up lever (1). After t he seat is set to the desired po sition, r elease the lever.
00 mm (3.3 in) in 10 steps Adjustable distance:1 REMARK The seat can be reclin ed more when the seat is push ed to th e front. The amount of reclinin g decreases as the seat is pu shed b ack, so when moving the sea position. t back, return the seatback to the upright upright Pull up lever (2) an d set the backrest to a p osition that is comfortable for operat ion, then release the lever. Sit with your back agai nst the seat backrest when ad justing. If your back is not against the backrest, the backrest may s uddenly move forward. (C) Adjusting seat tilt Forward tilt adjust the angle of the front of the seat. (4 stages) Push lever (3) down to adjust the angle of the front of the s eat.
(4 To raise the angle at the front of the seat, keep t he leve r pushe d down and apply your we ight to the rear of the seat. To lower the angle at the front of the seat, keep t he leve r pushe d down and apply your we ight to the front of the seat. Rear tilt ust the angle of the rear of the seat. (4 stages) Pull lever (3) up to adj ust the angle of the rear of th e seat. (4 stag To raise the angle a t the rear of the seat, keep th e lever( 3) pulle d up and stand up slightly t o remove your weight from the seat. To lower the angle at the rear of the seat, keep th e lever(3 ) pulle d up and apply your weight to the rear of the seat. Amount of tilt: Up 13°, down 13°