. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS If side view mirror (C), (D) does not move smoothly when 3 - 81 Mirror (B) mirror mount so that it is possible to see people at the f the machine. Adjust the rear right o Install th e side view mirror in th e location indicated in the figure at right. (M): 30 mm (1.2 in) If the si de view mirror does not move smoothly wh en adjusting its angle, loosen mirror securing Tightening torque of bolt (3): 4. (0. e, loosen mirror securing bolt (3). 0 - 5.4 Nm 41 - 0.55 kgm, 3 - 4 lbft) ing torque of bolt (3): 4.
41 - 0.55 kgm, 3 - When a djusting the side view m irror angle, make a n adjustment so that t shown i he side of the machine c omes into view on the mirror as n the figure at right. Mirrors (C), Adjust the side view mirrors so tha t people around 1 m away from the machi (W): 1 m ( g its angle, loosen mirro r securing screw ( ing torque of screw (4): 2.2 - 2. 6 lbft) When i nstalling mirrors (C) a nd (D), make su re to leave clearan stay. (V): Min ce (V) to prevent contac t between the mirr or and mirror . 10 mm (0.4 in)