. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATION WARNING position and confirm that swing lock monitor lamp (2) lights up. 3 - 102 Before o perating t he control leve r, check the directio n of the tr ack frame . If the track frame is fac ing the rear (if the sprocket is at the front), th e machine mov es in the o pposite direction from operation of the travel le reversed , left and right steering i s reversed). Before s tarting the machine off, c heck that t he area a round the machine is safe, and sound the h D o not a llow anyo ne to enter the area aroun d the machine. Clear an y obstacle s fro m the trav el path.
There is a blind sp ot at the rear o f the machi ne, so be particularly carefu l when traveling in rever If the con trol lever is operated wh en the auto deceleration is being actuated, the engine speed will suddenly rise, so be carefu when op erating. machine off, check that the travel alarm sounds normally. Before s tarting the machine off, c heck that t he travel alarm sound Preparations for Moving the Machine 1. Set sw ing lock switch (1) to the ON (actuate 2. Turn f uel contr ol dia l (3) tow ards the fu ll speed positio n to i ncrea se the e ngine speed.