. OPERATION MACHINE OPERATIONS AND CONTROLS WORKING MODE NOTICE Do not use the P mode for breaker operations. If breaker operations are carried out in the heavy-duty operation mode, there is a hazard that the hydraulic equipment may be damaged or broken. One-Touch Power Max. Switch The one-touch power max. Switch can be used during operations to increase the power. Make effective use of this function whenever necessary in combination with the working mode. Press the left knob switch and keep it pressed. The power is increased as long as the switch is being pressed. However, the increased power is automatically canceled after 8.5 seconds.
This function is not actuated when the working mode is set to L mode or B mode. 3 - 111 Working Mode The mod e selecto to enabling work to b e performed e fficiently Make effectiv e use of each mod e as follows. When the starting switch is turne d to the ON position, the working mode is set to P mode (digging). purpose, thereby Use the working m ode switch to set the mode to the most efficient mode to match the typ e of work.
Working mode Applicable operations P mode Normal digging, loading operations (Operations with emphasis on productivity) E mode Normal digging, loading operations (Operations with emphasis on fuel consumption) L mode When positioning work equipment exactly (Fine-control operations) B mode Breaker operations