. OPERATION TRANSPORTATION bending. 6. Turn the travel speed selector switch to low speed travel (Lo lamp lights up). Press travel speed selector switch (5) to set the travel speed. The travel speed (Lo, Mi, Hi) is displayed on monitor display (6). 3 - 136 Unloading 1. Load and unload on firm level ground only. Mai ntain a safe distance from the edge of a r 2. Apply the trailer br akes securely, then put blocks (1) under the tires to prevent th e trailer from moving. ght ramps (2) parallel to ea Set left and ri to the left and right of center (3 ) of the trailer. installation (4) a maximum of 15°. If the weight of the large amount under the locks under the ramps to prev ent them from 3.
Remove the chain s and wire ropes fastening th 4. Start the engine. up fully. to FREE position (F). Warm the engine 5. Set the lock lever 7. Turn auto-deceler ation switch (7) OFF and op erate the fuel . s pressed, it control dial to set Each time au switches OFF When auto-dec control dial to set the engine speed to low idling to-deceleration switch (7) i J ON J OFF in turn. eleration switch (7) is turned OFF, display