Komatsu — Komatsu PC308USLC-3E0 Hydraulic Excavator Operation & Maintenance Manual

. OPERATION TRANSPORTATION LIFTING MACHINE WARNING 3 - 138 The operator carrying out the lifting operation using a cran e must be a proper ly qualified crane ope Never raise the machin Always make sure that the wire rope is of ample strength f or the weight of thi When lifting, keep the When carrying out liftin g operations, set the lock lever to the LOCK position to prevent the machine fr om moving unexpectedly. Never enter the area u nder or around a raised machine. Never try to lift the machi ne in any posture other than the pos ture given in the pr ocedure below or usin g lifting equipment other than in the procedure bel ow. machine may lose its balance.

There is a hazard that the NOTICE lies to the standard specification machine. rs according to the attachments and options installed. This method of lifting app lies to the standard specification m The method of lifting diffe rs according to the attachments and options installed. For details of the procedu re for machines that are not the sta ndard specification , please consult your For weight, see "SPEC IFICATIONS (PAGE 5-2)". When lifting the machi ne, carry out the operation on fla t ground as follo 1. Start the engine, then the swing the upper structure so that the work equipment will be on the side of sprocket (1). 2.

Extend the bucket cylinder and arm cylinder fully, then lower the work equipment to the ground as shown in the diagram on the right using the boom cylinder. 1. Start the engine, th en the swing the upper structure so that the ll be on the side of sprocket (1). then lower 2. Extend the bucket cylinder and arm cylinder fully, t to the ground as shown in the diagram on 3. Set the lock lever s ecurely to the LOCK position (L 4. Stop the engine, c heck that there is nothing around the operator's c ompartment, then g Close the cab door and front glass securely.