. MAINTENANCE MAINTENANCE PROCEDURE Method of Setting Machine at Angle Method Using Slope WARNING Method Using Block WARNING 4 - 37 Select a sol id and smooth slope Always put blocks under the tra ck to prevent the machine from moving, and dig the w ork equipment into t 1. Stop th e machine so that the work equipme nt is o n the downhill side. 2. Pu t blocks under the trac k and dig the work equipmen t into the ground . Select a firm flat place. Put strong blocks under the und ercarriage to stabiliz e the machine and be extremely careful w hen carryin g out the operatio 1. Raise the chassis with th e boom and arm. When doing this, operate the levers slowly. 2.
Insert block make the machine stable. 3. Raise the boom slowly a nd lower the machine. When doing this, check t hat the machine is always s table.