. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING 4 - 61 After the engine has been operated, all parts are at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down bef ore starting the operation. l piping system when the engine is running. High pressure is generated inside the engine fue l piping system when t When replacing the filter, wait for at least 30 se conds after stopping th e engine to let the intern al pressure go down before replacing the filt er. fire or flame close. Do not bring any NOTICE Genuine Komats u fuel filter cartridges use a sp ecial filter that has hig hly efficient filtering abilit y.
When replacing the filter cartridge, always use a genuine Komatsu part. The common rai l fuel injection system used on this machine consists of more precise parts tha n the conventional injection pump and nozzle . If any part other than a genuine Komatsu filter ca rtridge is used, dust or dirt may get in and cause problems with the injection system. Always avoid using substitute parts. When carrying o ut inspection or maintenance of the fuel system, pay m ore attention than normal to the entry of dirt. If dirt is stuck to any part , use fuel to wash it off complet ely. isconnect the hose connecting.
When replacing the fuel filter cartridge, do not d isconnect the hose con Prepare a cont Prepare a filter 1. Turn the valv e (1) at the bottom of the fue l tank to the CLOSE position (S). 2. Open the eng ine hood. iner to catch the fuel under the filter cartridge. 3. Set the conta iner to catch the fuel under t 4. Using a filter to remove it. wrench, turn filter cartridge (2) counterclockwise 5. Clean the filte cartridge thinl holder. r holder, coat the packing sur y with oil, then install the filter face of the new filter cartridge to the filter