. OPERATION DETAILED CONTROLS AND GAUGES Travel Levers WARNING also be reversed.) frame is facing the front.) This lever (2) is used to change the direction of travel between (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops 3 - 40 Do not rest your foot on the pedal during operations. If th e pedal is depressed by mistake, the mach ine may suddenly move ccident. Be extremely carefu l when operating t he pedal for travel or steering op erations. When you are o not rest your foot on it. If the track frame is fa cing the rear, the direction o f travel operations wi ll be reversed when the trave l lever is operated.
(The ward when operated in reverse, and in reverse when operated forward; the left and right directions will When operating the tr avel levers, check if the track frame i s facing th e front or the rear. (If the sprock et is at the rear, the track forward and reverse. ( (a) FORWARD: The l ever is pushed forward REMARK If the lever is shifted to the FORWARD or REVERSE p osition the Neutral position, th e alarm sounds to warn t hat the machine starting to move.