Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING machine is at an angle, move it to a level 5 lead to 3 - 83 Whe n removing the oi l filler cap, oil may spurt ou t, so stop the engin e and wait for the oil tempera ture to go down, then turn the c ap slowly to relea se the interna l pressure be fore r emoving the c ap. If oil has been added t o above the H mark , stop th e engine and w ait fo r the hydraulic oil to cool dow n. Then remove drain plug (P), l oosen drain valve (1), and drain the e xcess o REMAR When i nspecting, if th place t o carry out the 1. Lo the engine. Wai utes before ch ecking oil level. O il level should b e betwee H and L in sig ht gauge (G).

NOTICE l level is above the H line, do not add oil. Doing so If the oi oil. Doing may damage to the oil pressu re circuit and spouting out of oil . 2. If t he level is belo w the L mark, add oil through oil f iller