Komatsu — STARTING ENGINE

. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING starting switch (2) and turn the key to the 3 - 95 Start the engine only afte r sitting down in the operator's sea Do not attempt to start the engine by short-circuiting the eng ine starting circuit. Such an act may caus e a serious bodily injury or fire. Check that there are no p ersons or obstacles in the surroun ding area, then sound the horn and start Exhaust gas is toxic. Whe n starting the engine in confined s paces, be particularly careful to ensure NOTICE Do not crank the starting If the engine does not sta motor continuously for more than 20 seconds. rt, wait for at least 2 minutes, then repeat the procedure from Step 2.

Before starting the engin idling (MIN) position. On this machine, to protec e, check that the fuel control dial is at the low t the turbocharger, a turbo protect function is provided. In cold weath er, even if fuel control dial (1) i s operated immediately after starting the engine, the engine speed may not change fo r several seconds. If t he fuel control dial is at the FULL position, the engine will accelerate suddenly and cause da mage to the engine parts, so set it to an position. intermediate or low speed 1. Set the fuel control di al to the low idling (MIN) positi on.

If it is at the high id the low idling (MIN If it is at the high id ling (MAX) position, always change it to ) position. ange it to 2. I START position (C).