Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE WHEN LOOSENING TENSION WARNING 1. Remove both bolts (1), then remove cover (2). NOTICE There is a safety label stuck to the back of cover (2). Be careful not to damage the safety label. WHEN REMOVING TRACK WARNING 4 - 32 It is extremel y dangerous to release the grease by a ny meth od except th If track tensio n is not relieved by th is procedure, co ntact yo ur Komatsu When rem oving cover (2), be car eful not to let an y dirt ge t inside 2. Loosen plug (4) gradually to release the g 3. Turn plu g (4) a maximum of 4. If the gr backwa ease does not come rds and forwards a out smoothly short distance. , move the machin 5. Tighten 6. To chec plug (4).

k that the correct tension has been achieved, move th machin e backwards and for wards. 7. Check t he track tension aga in, and if the te nsion is not correc adjust it again. Depending o n the situation, the ope ration to remov e the trac k may be e Before remov ing the track, if the pro cedure "WHENL OOSENI NG TENSION (PAGE 4-32)" does not loosen the track tension, contac your Komats u distributor for repair