. MAINTENANCE SERVICE PROCEDURE ADJUST IDLER CLEARANCE backward under external (1) and guide plate is side play in the idler, or track to come off or resulting in ADJUSTMENT REMARK There are two types of shim (thickness: 0.5 mm (0.02 in) and 1.0 mm (0.04 in)). 4 - 34 The idler move s forward and whe worn As th turns at an ang uneven wear, s le, causing t o adjust as fol pressure (2) become the idler 1. D rive the m achine for 8 to 12 m ( 24.4 to 36.6 ft) on fla t ground, hen measu re clearance A (4 places: left , right, inside outside) etween th e track frame and sid e guide (1). 2.
I f clearance A is more tha n 3 mm (0.1 in) , remove bolt (3), then ake out shi m (4), and adj ust to t hat t he clearance on one side s less than 0.5 mm (0.02