. MAINTENANCE SERVICE PROCEDURE 4 - 43 CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER Clean the air con ditioner air filter if it bec omes clogged o r if there is dirt or oil stuck to 1. Open inspect ion cover (1) and remo ve fresh air filte r (2) 2. Open inspec tion cover (3) under th e front panel and pull up . sed air. If there is oil stuck up 3. recirculation Clean filters ( air filter (4) to remove it 2) and (4) with compres to the filter, o r it is extremely dirty, w ash it in a neutr al agent. again. After washin g it, dry it completely be fore installing it again.
REMARK I f the filters cann ot be cleaned with air o r in water, repla ce them with REPLACE AIR CONDITIONER BELT 1. Loosen 4 bolt to the side. 2. Replace the When adj directly wit 3. Tighten jack V-belt. The s (0.4 in) when kg) at a point pulley and fa s (1) and jack bolt (2), then move compressor (3) V-belt. usting the V-belt, do not push the compressor h the bar. Use jack bolt (2). bolt (2) and bolts (1), tandard deflection for t pressed with a finger midway between the a and apply tension to the he belt is approx. 10 mm force of approx. 58.8N (6 ir conditioner compressor pulley and fa n pulley.