Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE TRAIN If the spring or strainer are damaged, replace them with a new part. CHECK, CLEAN FUEL STRAINER 4. After installing, open valve (1). 4 - 69 12. Refill the specif ied quantity of oil through oil fi ller (F After For d filling with etails, se oil, check that th e "CHECK OIL 1. Tight en valve ( 2. Rem ove cap (2 ), and wash the st rainer and s traine r case The s trainer for ms on e unit with t After tighte checking n cap (2). CHECK FOR LOOSE ROPS MOUNT B OLTS Check fo r loose an d damaged bolts. If any loose bolt is foun d, tighten to a torque of 1180 to 1 470 Nm (120 to 150 kgm, 868 to 1,085 lbft).

lt is found, replace the bolt with a genuine Komatsu bolt. f any da maged bo lt is found, replace the bolt wit h a genuine Komatsu bolt