. MAINTENANCE SERVICE PROCEDURE METHOD OF RELEASING PRESSURE IN HYDRAULIC CIRCUIT 4 - 81 1. Lower t he work equipment to th e ground. 2. Set the parking b rake lever and work equipm ent lock lever t o the LOCK Carry o ut Steps 3 - 5 within 15 s When th e engine is stopped, the pressure in t he accumulator gradually g oes d own. For this reason, the release can onl y be carried out immedia tely after the engine is stopped. 3. Stop the engine. 4. Turn the starting switch to the O N position (B 5. then op blade control lever and rip per control leve fully to t he front, rear, left, and ri ght to releas e the pressure i the hydr aulic circuit 6.
Set the work equipment lock lev er to the LO CK position and turn the starting switch to the OFF positio