Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. 6. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 3 - 90 WALK-AROUND CHECK Before starting the engine, walk aro und the machine and look at the underside of c hassis for anyth ing unusual l ike loose bolts and nuts, leakage of fu hydraulic system. el, oil and coolant.

Also check the condition of the work equipment and the d collection of dust at places that reach high temperature. the Also check for loose wiring, play, an d collection of dust at places that reach high t Leakage of oil or fuel, or accumulatio n of flammable material around high temperature parts, such as the engine muffle r or turbocharger, may cause fire. Check carefully, and if any abnormali ty is found, repair it or contact your Komatsu distributor. ty is found, repair it or contact your Komatsu distrib Do not get on or off the machine from the rear. Using this position is dangerous because it is easy to slip a nd you cannot be seen from the operator's compartmen t.

Always use the handrail and step at the side whe n getting on or off the machine. If the machine is at an angle, make it level before checking. und the machine and under the machine to check for loose nut or bolts, or Before starting the engine, look aro leakage of oil, fuel, or coolant, and c heck the condition of the work equipment and hydraulic system . Check also for loose wiring, play, and collection of dust at places which reach high temperatures . Always carry out the items in this se ction before starting the engine each day. 1. Check for damage, wear, play in work equipment, cylinders, linkage, and hos es. Check that there are no cracks, any problem is found, repair it.

excessive wear, or play in the work equipmen t, cylinders, link age, or hoses . If 2. Remove dirt and debris from aro und the engine, battery, and radiator. Check for dirt accumulated arou etc.) around the battery, engine flammable materials are found, nd the engine and radiator. Also check for flamm able material (d ry leaves, twigs, muffler, turbocharger, or other high temperature engine parts. If any dirt or remove them. 3. Checking engine for leak of wat er, oil and air Check the engine for leak of en system. If any leak is found, rep gine oil, leak of water from the cooling system and leak of air f rom the suction air it. 5.

Check for oil leakage of oil from power train case, final drive case, hydraulic ta nk, hoses, and Check that there is no oil leakag Check for leakage of oil from th e. If any problem is found, repair the place wh ere the oil is lea e undercover. Check the ground for traces of oil leakage.