. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 95 Normally, do no t open the radiator cap. Whe n checking the coolant level, check the sub-tank whe D o not remove t he cap when the radiator co olant is hot. Boiling coolant may spurt out. After the coolant temperature goes down, turn the c ap slowly to release the pres sure, then remove i 1. Open the eng ine side cover on the left side of the chassis , and check that th e coolant is between the F ULL and LOW marks on sub-tank (1). 2. I f the coolant level is low , open the en gine side cover o n t he l t ight side of the chassis and add coo lant to the FULL level nk (1).
hrough the c oolant filler port in sub-ta REMARK The coolant may overflow from the sub-tan k drain hose. This is no problem. It occur s because t oo much cool ant has been added. 3. After adding coolant, tighten the cap s ecurely. ere is probably water 4. I f the sub-ta nk becomes empty, th water l r eakage. Afte r checking, repair any abn ormality immediately. It no abnormal ity is found , check the le vel of the water i n t he adiator. If it density as is low, add Supercoolant (AF-NAC) of the same the Supercoolant in th t to the sub-tank. e radiator, then add side cover. then Supercoolan 5. After adding coolant, close the engine