. MAINTENANCE SERVICE PROCEDURE WHEN IT IS IMPOSSIBLE TO CHECK ELECTROLYTE LEVEL FROM SIDE OF BATTERY of the battery, or there is no display of the UPPER water If the water so with of your WHEN IT IS POSSIBLE TO USE INDICATOR TO CHECK ELECTROLYTE LEVEL 4 - 62 If it is i mpossib le to check the electr olyte level from the si , check as follows. LEVEL line on the side of the battery 1. Ope n the b attery cover on the lef t side of the machine 2. Remove vi nyl sheet (1) installed on the top of the batte 3. Remove ca p (2) at the top of the battery, look through filler port (3), and check the electrolyte dose not reach the sl (example:
commercially available reaches the bottom of sleeve (4) (A) Suitable level: Electrolyte l so surface surface to b (B) Low: Electrolyte level is no poles appear straight filler (3), a nd check the not reach the sl electrolyte surface. dose eeve (4), add distilled (example: c ommercially available battery refill) so that th reaches the bottom of sleeve (4) (Max. level: UPPER LE evel is up to bottom of s tension causes elec ulge and poles appear ( B) Low: Electrolyte level is no t up to bottom of slee and not bent. n cap (2) securely. poles appear straight 4.
Afte r addin g distilled water, tighte REMARK If water is adde d to above the bottom t ip of the sleeve, use a to remo sodium ve electrolyte. Neutralize t bicarbonate, then flush it a water. battery If it is p ossible t o use an indicator to check the electrolyte l evel, follow the instructions given.