. ATTACHMENTS, OPTIONS HANDLING 3 M WIDE BLADE MAINTENANCE WHEN REQUIRED ADJUSTMENT OF PLAY IN BLADE BOSS WARNING Shim table 6 - 13 It is danger ous that the work e quipment s tarts moving for some r eason while y ou are adjusting the bla Set the wor k equipmen t under a stable co ndition, stop the engine , and securel y set th e work equipmen t lock lever an d parking brake lever to their LO NOTICE If the wear of the cente r blade boss is left as it is, i t becom es difficult to work s tably an d the machine m ay be damage If shims (1 ) and (2) i n boss es (3) of t he cent er blad e are w orn, f olding or unf olding of the bl ade become s difficult.
Replace a nd adjust shims ( 1) and (2) in the b osses at both end s according t o the following procedure. 1. Stop t he machin e in a h orizontal place. the machine. 2. Raise the blade and se t it in para llel with the ma chine. 3. If shim s (1) and ( 2) at th e bosses (4 place s) of th e cente r blad are wo rn, remov e them 4. Measu blade. 5. Insert new shims (1) an d (2) so th at clearances ( A) and (B) a 0 - 0.5 mm (0 - 0 .020 in ), and the n install pins (4 ). Location No. Part No. Shim thickness (mm (in)) A (1) (2) 21Y-70-14710 1.0 (0.039) 21Y-70-14850 2.0 (0.079) B (1) (2) 21Y-70-14710 1.0 (0.039) 21Y-70-14850 2.0 (0.079)