Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 04 FUEL SYSTEM Subsection 02 (ELECTRONIC FUEL INJECTION (EFI)) 3. Customer name 4. Enter the old ECM serial number in the Part Replacement under History tab. Click on Add Part in History . Perform the Closed throttle reset. Refer to Closed Throttle Reset (TPS) in ADJUSTMENTS in this subsection. Reinstall remaining removed parts. FUEL RAIL Fuel Rail Removal Open seat. Remove rear ventilation box. Refer to AIR INTAKE SYSTEM. Remove deck extension. Refer to BODY. Pull out relay in fuse box #2 to prevent fuel pump to turn on unexpectedly. Refer to POWER DISTRI- BUTION. Fuel Rail Hose Disconnection 1. Release fuel pressure. Refer to FUEL PUMP in FUEL TANK AND FUEL PUMP subsection. 2.

Disconnect fuel hose from fuel rail using the FUEL HOSE DISCONNECT TOOL (P/N 529 036 037) . smr2009-030-008 HISTORY AND PART REPLACEMENT TABS NOTE: The ECM serial number can be found on the ECM sticker that also shows the part number. Go to the Keys tab and Erase All Key s. 529036037 mmr2009-023-087 1. Program the desired key(s). Refer to D.E.S.S. SYSTEM. 2. Briefly press the vehicle START button to wake up the ECM. Engine must not crank. 3. Click on the Write Data button. lmr2006-008-010 NOTE: It may be necessary to rotate fuel hose fit- ting to align the tool ends with the openings of the locking mechanism. NOTE: Wrap a rag around the hose end to catch fuel leakage.

vmr2006-012-100_ben 230 smr2009-030