Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 06 STEERING AND PROPULSION Subsection 03 (JET PUMP) smr2009-006-017_a TYPICAL 1. O-rings 12. Before installing any other parts, pressurize jet pump to insure proper seal installation. Refer to LEAK TEST in this subsection. 13. Install impeller. Refer to IMPELLER in this subsection. 14. Mount in a vise the appropriate impeller re- mover/installer tool according to engine type. ' TYPICAL 16. Using a 30 mm socket, screw the impeller shaft nut on clockwise. 17. Torque nut as specified in exploded view. smr2009-006-009_b 18. Apply 24 ml (.8 U.S. oz) of JET PUMP BEARING GREASE (P/N 293 550 032) on the bearing (nut side). 6 A$; 1. Impeller remover/installer tool 15.

Install jet pump housing over this tool. smr2009-006-018 424 smr2009-039 MODEL TOOL 130 and 155 engines IMPELLER REMOVER/INSTALLER (P/N 529 035 820) 215 and 255 engines IMPELLER REMOVER/INSTALLER (P/N 529 035 956)