Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 09 WIRING DIAGRAM Subsection 01 (WIRING DIAGRAM INFORMATION) WIRING DIAGRAM INFORMATION GENERAL WIRING DIAGRAM LOCATION The wiring diagram is in the back cover pocket. WIRING DIAGRAM CODES Wire Color Codes smr05-026-002_a 1. Wire main color 2. Tracer (thin colored line) TYPICAL 1. Wire identification numbers 67: General Wire Color Use Terminal Identification on Wiring Diagram In-line connectors of wiring harness are given on the wiring diagram with their approximate location and the following information. Terminal Identification on Connector On the wiring diagram, a letter or a digit is used to identify the terminal position in a connector. smr2009-045-006_a 1. Connector location 2.

Connector identification (reference number) 3. Number of pins CAN Wire Circuit References On the wiring diagram, CAN linked components use the following coding. smr2009-045-005_a 1. Terminal position On a connector, a letter or a digit is usually molded on the connector to identify the terminal position. smr2009-044 517  COLOR USE RED Battery power (12 Vdc directly connected to battery) RED + tracer Fused 12 Vdc power or switched power from relay YELLOW Alternating current (AC) from magneto BLACK Ground BLACK + tracer Switched ground (by ECM) WHITE/RED WHITE/BLACK CAN HI wires CAN LO wires