Section 02 ENGINE Subsection 04 (SUPERCHARGER) smr2009-020-012_a 1. Air inlet hose 2. Hose clamp smr2008-012-011_a 1. Rubber adapter 2. Exhaust pipe Remove air outlet hose from supercharger. Loosen clamp securing rubber adapter to exhaust pipe. Detach muffler strap. Move muffler back (± 5 cm (2 in)). Remove retaining screws and pull out the super- charger. smr2009-020-013_a 1. Air outlet hose 2. Hose clamp Unscrew blow-by valve screws and move it aside to make room. smr2009-020-005_a 1. Retaining screws 2. Upper retaining screw (hidden behind the supercharger) NOTE: To remove the upper retaining screw, use the TORX ADAPTOR (P/N 529 035 938) . smr2008-012-010_a 1. Blow-by valve 2.
Supercharger 529035938 Using a marker, trace a mark on rubber adapter and exhaust pipe. smr2009-020 43