General Information 0A-15 General Precaution General Precautions 1 2 3 MFW70AMF000201 Legend 1. Clean and safe costume 2. Installation of Chock blocks 3. Support by stand after jack up Work preparations When lifting up the vehicle using a lift, make sure to set the safety device. When performing a procedure with two or more people, make sure to ensure each other's safety before performing an action. Do not leave the engine running for an extended period of time or perform painting in a poorly ventilated working environment. Make sure to use only the special tools if the procedure requires them for the work.
Performing the procedure using other tools may cause damage to parts or personal injury. Do not use tools such as a wrench that has lost its edges, a hammer with frayed edges, or a chipped chisel. When performing work using a device such as a grinder, crane, or welder, make sure that a qualified technician performs the procedure while paying sufficient attention to the handling precautions. Prepare the tools, instruments, and special tools in advance. Prepare the parts that require replacement and parts that cannot be re-used in advance. Clothing The service technician must wear a clean service technician uniform, hat, and safety footwear. Protect the vehicle.
Make sure to use a seat cover, etc. Disconnect the terminal of the battery (–) in advance. Always focus on safety Make sure to use chock block when the vehicle is jacked up. After jacking up, make sure to support the specified position using a stand.