0A-26 General Information 1 2 4 3 LNW7Z0SF000101 Legend 1. Tech2 24V adaptor 2 (body) 2. Signal change switch 3. Tech2 connecting cable 4. DLC connecting cable [Euro4 specification] 1 2 LNW7Z0SF000401 3 Legend 1. CAN-di module (body) 2. Tech2 connecting cable 3. DLC connecting cable Features and cautions regarding the scan tool (Tech2) / Tech2 24 volt adaptor 2 / CAN-di module [Euro4 specification] The Tech2 is able to draw graphs of snapshots. To select a menu, press the selection key or choose a menu with a function key and press the ENTER key. You can return to the main menu at any time by pressing the EXIT key.
To clear the diagnostic trouble codes (DTC), open the application menu and select "Clear DTC Information". The Tech2 adaptor 2 has a built-in DC to DC converter (that converts 24 V to 12 V). The Tech2 has a 12 V power system. Do not directly use 24 V power. Do not directly supply power from the cigar lighter. Remove/install the PCMCIA card after turning the power off. The Tech2 has the capacity for two snapshots. As the PCMCIA card is sensitive to magnetism and static electricity, take care when handling it.