Isuzu — Transmission Oil - FS8209A/FSO5206B Type

General Information 0A-65 About Oil Types (for Europe) NOTE: If you use a transmission oil with a viscosity number of SAE 80W or above in a moderate ambient temperature condition, gears will become difficult engage. Oil Class 02A Oils with a viscosity corresponding to any of the following numbers : SAE 80W/80W-85/80W-90/85W-90/90 Oil Class 02D Semi-synthetic and synthetic oils with a viscosity corresponding to the following number : SAE 75W-80 Oil Class 02L Semi-synthetic and synthetic oils with a viscosity corresponding to any of the following number : SAE 75W-80 Oil Class 02E (ZF-Ecofluid M) Synthetic oils with a viscosity corresponding to any of the following number : SAE 75W-80 NOTE:

If you use a transmission oil with a viscosity number of SAE 80W or above in a moderate ambient temperature condition, gears will become difficult engage. Oil Class 02B Oils with a viscosity corresponding to any of the following numbers : SAE 75W-80/75W-85/75W-90/80W/80W-85/80W- 90/85W-90/90 Transmission Oil - FS8209A/FSO5206B Type Carry out periodic maintenance on the transmission in order to maintain its original performance. It is particularly important to replace the transmission oil according to the Maintenance Schedule. The Maintenance Schedule varies according to the type of oil used.

Mineral Oil Recommended lubricants Operating conditions Replacement interval Inspection and replacement item Highway use First 5,000 to 10,000 km (3,000 to 6,000 miles) Change transmission oil at the driver’s discretion Every 20,000 km (12,000 miles) Check oil level and inspect for leakage Every 100,000 km (62,000 miles) or every 12 months Change transmission oil Off-highway use First 30 hours Change transmission oil at the driver’s discretion Every 40 hours Check oil level and inspect for leakage Every 500 hours Change transmission oil (driving on unpaved roads) Every 1,000 hours Change transmission oil (driving on normal paved roads) Type Grade (SAE) Outside temperature Heavy Duty Engine Oil API-CD 50 - 12°C (10°F) or higher 40 - 12°C (10°F) or higher 30 Up to - 12°C (10°F) Mild EP Gear Oil API-GL-4 90 - 12 to 38°C (10 to 100°F) 80W - 26 to 21°C (-15 to 70°F)