Isuzu — Diesel Fuel / Applicable Standard

General Information 0A-77 Engine coolant prevents engine damage due to freezing and protects the cooling system from corrosion. Use a mixture of the engine coolant concentrate solution and distilled water or deionized water as the engine coolant. Use only an Isuzu- recommended engine coolant solution. Mix with for 30 or 50% solution and the rest water. *For other than Isuzu genuine coolant(TEXACO/ CALTEX/CHEVRON, etc.), it is recommended to use directly “ 50/50 Pre-diluted” product which is already diluted to 50% concentration. NOTE: If the engine or vehicle is used at -30 ° C(-22 ° F) or below, the coolant concentration of 55% is recommended.

Using coolant at any coolant concentration other than that specified may reduce anti-freezing performance, and engine coolant may freeze. If the mixture contains over 60% engine coolant, the possibility of overheating increases; conversely, if the mixture contains less than 30%, protection against corrosion will be inadequate. Accordingly, the mixture should contain between 30% and 50% engine coolant. Electric-hydraulic Cab Tilt Pump GRADE MIL-H-5606E aviation oil or equivalent Clutch and Brake Fluid Reservoir * : This material meets GENERAL MOTORS ENGINEERING STANDARDS GM4653M,FMVSS 116 or SAE J1703 requirements.

Diesel Fuel / Applicable Standard Usage region Outside temperature Coolant concentration Isuzu genuine coolant Other than Isuzu genuine coolant* Warm region Up to -12°C(10°F) 30% 50% Cold region Up to -30°C(-22°F) 50% 50% MAKE BRAND GRADE* ISUZU GENUINE AC DelcoTM BESCO brake fluid super Delco supreme11 DOT 3 DOT 3 Japanese Industrial Standards (JIS) Deutsche Industrie Normen (DIN) American Society for Testing and Materials (ASTM) British Standards (BS) Based on K2204 : 1997 Diesel Fuel Based on EN590 : 1997 Based on D975-04c NO.1-D S500 or NO.2-D S500 (below 500 ppm) Based on EN590 : 1997