General Information 0A-81 Center Bearing, Clutch Shift Block, Grease Lubricated Hub, Water Pump, Propeller Shaft Sliding Yoke, Universal Joint (Multi Purpose Grease) Engine Cooling System OTHER GENERAL MOTORS ENGINEERING STANDARDS GM 6277-M or equivalent Engine coolant prevents engine damage due to freezing and to protects the cooling system from corrosion. Use a mixture of the engine coolant concentrate solution and distilled water or deionized water as the engine coolant. Use only an Isuzu- recommended engine coolant solution. Mix with for 50% solution and the rest water. *Direct use of “ 50/50 Pre-diluted” product which is already diluted to 50% concentration is recommended. NOTE:
If the engine or vehicle is used at -30 ° C(-22 ° F) or below, the coolant concentration of 55% is recommended. Using coolant at any coolant concentration other than that specified may reduce anti-freezing performance, and engine coolant may freeze. Electric-hydraulic Cab Tilt Pump MIL-H-5606E aviation oil or equivalent GRADE GRADE API ACEA JASO OTHER NLGI #2 or #3 multi purpose type grease Usage region Outside temperature Coolant concentration* Warm region Up to -12°C(-10°F) 50% Cold region Up to -30°C(-22°F) 50%