11 OPERATING THE ENGINE 2. Set the range gear shift lever to the "NEUTRAL" position. 4. Push the speed control pedal down about 1/2 way. (1) Range gear shift lever (H) HIGH Range (M) MEDIUM Range (L) LOW Range (R) "REVERSE" (N) "NEUTRAL" POSITION (1) Speed control pedal (A) "INCREASE" (B) "DECREASE" 5. Insert the key into the key switch and turn it "ON". 3. Lock the hydraulic lift cylinder lever to the "NEUTRAL" position with a restricting plate by tightening knob bolt. ( ) "OFF" (Engine-Stop) ( ) "ON" (Engine-Run) ( ) "GLOW" (Preheat) ( ) "START" (Engine-Start) (1) Hydraulic lift cylinder lever (2) Restricting plate (3) Knob bolt (A) "LOCK"