OPERATING THE VEHICLE 16 2. Selecting light switch position. B Hazard Light Switch [if equipped] Press the top half of the hazard light switch, the hazard light flash along with the indicator on the instrument panel. Press the bottom half of the hazard light switch to turn off the hazard light. B Head Light Switch The head light switch is operative when the key switch is in the "ON" position. Turn on the key switch and turn the head light switch to the "ON" position. Turn the head light switch to the "OFF" position to turn off the head light. A The hazard light switch is operative when the key switch is in either the "ON" or "OFF" position.
Be careful that leaving the switch "ON" causes the battery to run out. B Turn Signal Light Switch [if equipped] To indicate a right turn, turn the turn signal light switch clockwise. To indicate a left turn, turn the turn signal light switch counterclockwise. When the left or right signal is activated, the indicated turning light will flash and the other will stay on. The indicator lamp at the instrument panel also flashes like the above. (1) Head light switch (A) Head lights "ON" (B) Head lights "OFF" A The turn signal light switch is only operative when the key switch is in the "ON" position.
If the hazard light switch is pressed to the "ON" position while the turn signal is activated, the indicated turning light will flash and the other will stay on. A Be sure to return switch to center position after turning. A Turning the head light switch to the "ON" position causes the following lamps to light simultaneously. (1) Tail lights (lamps at the rear portions of the vehicle) (2) Lamp built in the coolant temperature gauge (3) Lamp built in the fuel gauge (4) Lamp built in the speedometer (1) Speedometer (2) Hazard / Turn signal indicator (if equipped) (3) Turn signal light switch (if equipped) (4) Hazard light switch (if equipped) (5) Coolant temperature gauge (6) Fuel gauge