45 PERIODIC SERVICE HOW TO RAISE THE CARGO BED To avoid personal injury: A When servicing under raised bed, make sure safety support is properly mounted. A Do not touch muffler or exhaust pipes while they are hot; Severe burns could result. B Raising and Lowering the Cargo Bed C To raise the cargo bed 1. Apply the parking brake and start the engine. 2. Release the restricting plate. 3. Pull up the hydraulic lift cylinder lever to raise the cargo bed. 4. When the cargo bed has been raised, return the lever to the "NEUTRAL" position. 5. Stop the engine. 6. Mount the safety support.
(1) Hydraulic lift cylinder lever (2) Restricting plate (3) Knob bolt (A) "UP" (N) "NEUTRAL" (B) "DOWN" (C) "FLOAT with Detent" C To lower the cargo bed 1. Start the engine and then lift the bed slightly by operating the lever. 2. Remove the safety support and store it in the given location. 3. Lower the lever to the "DOWN" position to lower the bed. 4. After making sure that the bed has lowered to the lowest position, return the lever to the "NEUTRAL" position and lock it by the restricting plate. A To raise or lower the cargo bed when the engine does not start or the hydraulics are not operating, shift the lever to the "FLOAT" position and raise or lower the bed manually.
(1) Safety support