heidenhain PWT 100, PWT 101 — 10.4 Module action screen

10 Module management menu | Module action screen 10.4 Module action screen Tapping a module in the Module management flash or Module management memory card screen opens the Module action screen. The available functions depend on the location where the module is saved (flash memory or memory card) and on the status of the module (active or inactive). Module action in the flash memory screen Figure 67: Module action in the flash memory screen The following buttons are available for a module in the flash memory: Active (module is activated) For information only, no action is possible Start (module is deactivated) Start the module. This makes the module the active module.

Remove Remove the module from the flash memory (after confirmation prompt) Details Information on the module HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 137